Civil Engineer
Your application and resume must clearly show that you possess the experience requirements. Transcripts must be provided for qualifications based on education. Provide course descriptions as necessary. Basic Requirement for the 0810 series:
Applicants must meet all qualifications and eligibility requirements by the closing date of the announcement as defined below. For more information on the qualifications for this position, go to:
https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/civil-engineering-series-0810/ Degree:
Successful completion of a full 4-year course of study in an accredited college or university leading to a bachelor's or higher degree that included a major field of study in professional engineering. To be acceptable, the curriculum must:
(1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A. Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described for a degree. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) In addition to the basic requirements listed above, the following additional education and/or experience is required. Your application or resume must clearly show that you possess the specialized experience requirements. For the GS-11 level:
Applicants must have 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree (coursework directly related to position being filled); OR one year of specialized experience equivalent to at least the GS-9 level in the federal service; OR an appropriate combination of specialized experience and graduate level education (beyond what is required for a master's degree, i.e., more than 36 semester hours leading to a Ph.D.). Specialized experience for the GS-11 grade level is defined as monitoring day-to-day performance of a contract by reviewing drawings for accuracy and adequacy, evaluating requests for routine design deviations, and/or conducting site surveys to determine the need for new equipment or material; preparing civil engineering design criteria for smaller or less complex projects, including portions of structures such as bridges, retaining walls, or structural pavement sections; planning and conducting engineering projects according to clear and specified objectives such as developing technical data on materials, sizes, dimensions, and quantities and costs of materials to be incorporated in formal specifications; and/or performing routine safety related assessments, such as determining compliance with existing Federal, State, and/or organization safety regulations and/or analyzing and evaluating potential safety regulation deficiencies. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. TIME IN GRADE REQUIREMENT:
If you are a current federal employee in the General Schedule (GS) pay plan and applying for a promotion opportunity, you must meet time-in-grade (TIG) requirements of 52 weeks of service at the next lower grade level in the normal line of progression for the position being filled. This requirement must be met by the closing date of this announcement.
Estimated Salary: $20 to $28 per hour based on qualifications.
Applicants must meet all qualifications and eligibility requirements by the closing date of the announcement as defined below. For more information on the qualifications for this position, go to:
https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/civil-engineering-series-0810/ Degree:
Successful completion of a full 4-year course of study in an accredited college or university leading to a bachelor's or higher degree that included a major field of study in professional engineering. To be acceptable, the curriculum must:
(1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A. Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described for a degree. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) In addition to the basic requirements listed above, the following additional education and/or experience is required. Your application or resume must clearly show that you possess the specialized experience requirements. For the GS-11 level:
Applicants must have 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree (coursework directly related to position being filled); OR one year of specialized experience equivalent to at least the GS-9 level in the federal service; OR an appropriate combination of specialized experience and graduate level education (beyond what is required for a master's degree, i.e., more than 36 semester hours leading to a Ph.D.). Specialized experience for the GS-11 grade level is defined as monitoring day-to-day performance of a contract by reviewing drawings for accuracy and adequacy, evaluating requests for routine design deviations, and/or conducting site surveys to determine the need for new equipment or material; preparing civil engineering design criteria for smaller or less complex projects, including portions of structures such as bridges, retaining walls, or structural pavement sections; planning and conducting engineering projects according to clear and specified objectives such as developing technical data on materials, sizes, dimensions, and quantities and costs of materials to be incorporated in formal specifications; and/or performing routine safety related assessments, such as determining compliance with existing Federal, State, and/or organization safety regulations and/or analyzing and evaluating potential safety regulation deficiencies. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. TIME IN GRADE REQUIREMENT:
If you are a current federal employee in the General Schedule (GS) pay plan and applying for a promotion opportunity, you must meet time-in-grade (TIG) requirements of 52 weeks of service at the next lower grade level in the normal line of progression for the position being filled. This requirement must be met by the closing date of this announcement.
- Department:
0810 Civil Engineering - Salary Range:
$64,009 to $83,210 per year
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
